Project Report on Rcc Hume Pipes (Reinforced Concrete Cement) [Eiri-0657]

35000 INR/Piece

Get a Price/Quote

Product Details:

Click to view more
Share Your Product:

Request To Call Back Send Inquiry

Project Report on Rcc Hume Pipes (Reinforced Concrete Cement) [Eiri-0657] Price And Quantity

Minimum Order Quantity 1 Piece
Price 35000 INR/Piece

Project Report on Rcc Hume Pipes (Reinforced Concrete Cement) [Eiri-0657] Trade Information

Supply Ability 1 Piece Per Day
Delivery Time 2-3 Days
Main Domestic Market All India

Product Description

Rcc Hume Pipes (Reinforced Concrete Cement) [Eiri-0657]

RCC Hume pipes are made of a mixture of portland cement, sand and aggregate in the proportion of 1:2:5:2.5 with steel rods and wires as reinforcement material. These pipes are manufactured in diameters ranging from 300 mm to 2200 mm or more. The RCC pipes are suitable for irrigation, culvert construction, sewerage and drainage purposes. Transportation of water, sewerage, effluents or other liquid slurries in these pipes is quite smooth. Seepage or leakage is totally avoided by proper jointing & sealing of two consecutive pieces of the pipe line. Hume pipes have reasonably good load-bearing capacity and hence, can be laid either underground or over the ground. Carefully made pipes, tested as per IS : 458-1971, are available in a wide range of sizes for use. Well constructed steel wire/rod cage is concentrically placed inside the pipe mould where premixed concrete is charged for pipe casting. The rotating moulds receive the feed material through open ends at both ends. This project proposes to manufacture RCC hume pipes in a range of diameters and 1.8 m & 2.8 m lengths which are in very common use.

Cost Estimation

Plant Capacity 50 R.M./Day
Land & Building (Area 2000 sq.mt.) Rs. 1.20 Cr.
Plant & Machinery Rs. 21 Lacs
W.C. for 3 Months Rs. 23 Lacs
Total Capital Investment Rs. 1.70 Cr.
Rate of Return 23%
Break Even Point 59%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.